The diffusing acoustic shells are acoustic treatment elements intended for large volume
rooms, such as theatres or auditoriums with a stage where orchestral concerts or mere
recitals take place. These acoustic diffusing components are meant to project the
non-amplified original sound from the stage to the audience. This will enable people to
hear the sound coming directly from its sound sources and instruments, without the
electro-acoustic inherent characterization or colouring. This panel also aims to enable
the stage and the room to be within the same space and not separate in two by the mouth of
the stage. JOCAVI®'s EFFECTFUSER®, WOODFOIL®, PLURA® and DYNAMICFLOW® models have been
designed at the specific scale of these needs. Due to its shape and depth, they also have
a high diffusion coefficient on medium/low frequencies. The all are large-sized diffusers
that provide a very homogeneous diffusion within the diffuse and sound spectrum.
Manufactured in ABS (except WOODFOIL® in wood) with a rigid framework, these pieces can be
coupled and multiplied in order to suit each project's demands. When mounted, several
modules should be grouped so as to obtain an area that is proportional to each space.
Mounting: They can be hung from the ceiling in a strategic position in order to obtain
sound diffusion in the required angles. They can also be mounted with a motorized rigging
system from the stage ceiling. These elements / modules are fastened with steel cables by
using appropriate mounting accessories. Their low weight makes mounting easier. As with
any other JOCAVI® diffusion panel, these models can also be applied on false ceilings,
flat ceilings or walls.
The combination of the various EFFECTFUSER®COMBI and the other models Plates, diffusing
pieces must be optimised so as to obtain a diffusion as uniform as possible in the entire
room.
MAIN FEATURES
To adjust the diffusing properties of these models to the room where this product is applied, the placement of the pieces must be taken into account in order to obtain its best performance, bearing in mind these two types of diffusion:
DIFFUSION WITH COMPRESSION EFFECTS (only EFX COMBI and EFX Plate)
It emphasizes the sound diffusion with a smaller covering angle, effective at a longer incidence distance.
Features: efficient at a longer distance; smaller incidence angle; higher sound level.
DIFFUSION WITH SCATTERING EFFECTS(only EFX COMBI and EFX Plate)
It emphasizes the sound diffusion at a wider covering angle, effective at a shorter incidence distance.
Features: efficient at a shorter distance; less sound level; wider incidence angle.
• JOCAVI® accepts no responsibility for any printing errors. Specifications can be modified without prior notice, if technical or commercial reasons so require.
• The colours shown on this catalogue are only a reference and an illustration of the products finishing. The colours shown are not binding because brightness, contrast and colour balance may vary due to the printing process.
• Colours may vary due to raw-material suppliers' changes and some differences may occur in tonal range.