EFFECTFUSER®
Diffusion shells are acoustic treatment elements used in large volume rooms, such as theatres and auditoriums, where orchestral concerts or mere recitals take place. The installation of these acoustic diffusion components aims to project the natural sound from the instruments and maintain some liveliness in the room's acoustics. JOCAVI®’s EFFECTFUSER® has been designed at the scale of these needs. It is a large-sized diffuser that provides a very homogeneous diffusion within the diffuse sound spectrum. Due to its shape and depth, the EFFECTFUSER® has a high diffusion coefficient on medium/low frequencies, thus making it more balanced when compared with other diffusers. This piece can be coupled and multiplied in order to suit each room's project. When mounted, several modules must be grouped in order to obtain a diffusion area that is proportional to each space. They are properly positioned on ceilings or walls in order to obtain sound diffusion at the intended angles. EFFECTFUSER® may also be used, like any other JOCAVI® diffusion model, in combination with other models of absorption panels.
FEATURES
 Manufactured with recycled ABS.
Average diffusion: 0.61/m2 [>100Hz;<5KHz]
Fire-resistance: M1
100% recyclable
Package: 1 and 3 units
Installation: mounting accessories included
EFX 060 - Features explained.
|
|
EFFECTFUSER®AcSh®P - EFX180Combi |
|
The diffusing acoustic shells are acoustic treatment elements intended for large volume
rooms, such as theatres or auditoriums with a stage where orchestral concerts or mere
recitals take place. These acoustic diffusing components are meant to project the
non-amplified original sound from the stage to the audience. This will enable people to
hear the sound coming directly from its sound sources and instruments, without the
electro-acoustic inherent characterization or colouring. This panel also aims to enable
the stage and the room to be within the same space and not separate in two by the mouth of
the stage. JOCAVI®'s EFFECTFUSER®, WOODFOIL®, PLURA® and DYNAMICFLOW® models have been
designed at the specific scale of these needs. Due to its shape and depth, they also have
a high diffusion coefficient on medium/low frequencies. The all are large-sized diffusers
that provide a very homogeneous diffusion within the diffuse and sound spectrum.
Manufactured in ABS (except WOODFOIL® in wood) with a rigid framework, these pieces can be
coupled and multiplied in order to suit each project's demands. When mounted, several
modules should be grouped so as to obtain an area that is proportional to each space.
Mounting: They can be hung from the ceiling in a strategic position in order to obtain
sound diffusion in the required angles. They can also be mounted with a motorized rigging
system from the stage ceiling. These elements / modules are fastened with steel cables by
using appropriate mounting accessories. Their low weight makes mounting easier. As with
any other JOCAVI® diffusion panel, these models can also be applied on false ceilings,
flat ceilings or walls.
The combination of the various EFFECTFUSER®COMBI and the other models Plates, diffusing
pieces must be optimised so as to obtain a diffusion as uniform as possible in the entire
room.
|
